Saturday, July 25, 2009

How to get swap magic disks to work on new PS2

what you need:

1. PStwo system
2. Swap magic cd version 3.2 and DvD v2.0 disks
3. Duck tape, or anything like that.
4. A small screw driver.

Step one

Open the PStwo (this does void the warranty). There are 6 screws located under the square pads at the bottom. Unscrew them and break the black seal at the back of the ps2. The cover then snaps off easy.

Step 2

Locate the the 2 objects that tell the ps2 the flip cover is closed (i call them tabs). These are little square boxes with a piece of plastic sticking out that are on a spring mechanism (these tabs are very small). You know you found them when you can touch the top and a piece of plastic moves in and out. Tab # 1 is located right behind the reset button and is easy to see. You can even see that tab #1 when the full cover is on the ps2 and the tray is open. The second tab (which is brown or tan colour on my ps2) is located right beside the LAN Ethernet port and is directly in front of the warranty seal. Its pretty easy to see because its sitting there all alone at the bottom of the ps2.

Step 3.

Cut super small squares of tape and place it on top of the tabs to make the little plastic deeley stay down. That is all you have to do. Just make the plastic spring thing stay down. It was pretty easy to do, and I made sure not to put tape on the green motherboard just in case. Make sure you tape both tabs down and they stay down.

Step 4.

Place the cover pack on and screw the screws back in.

DONE, the easy hacking part.


Step 5.

place the swap magic dvd into the ps2 let it boot up then all you have to do it take out the disk and put in your backup dvd then close the lid and hit X. I have GT3 on a memorex DVD+R and it worked right away.


Sorry for any typos or the vague description of the tabs. They are pretty easy to find and if someone could post my pic i have them circled so you can easily identify them

Have fun.